WP Series Gasoline Water Pump
Product Brief
WP series Gasoline water pump is the Self-priming single-stage single-suction centrifugal direct-connection pump,which is composed of Gasonline engine ,pump head ,pipeline fittings and support . The Gasoline engine is the pump dynamic driving ,engine and pump head share with same shaft .It has the features of compact struction, reliable performance,high efficiency ,no electricity power ,low fuel consumption,easy maintenace as well as low-cost for manufacturing,low lever noise ,etc .The working principle of WP Gasoline pump is under the condition of full of water in the pump ,gasoline engine drive the impeller rotating which generates centrifugal force to make the water in the impeller groove flow into the pump head ,at the same time ,impeller centre pressure decrease, this pressure is lower than inlet pipe pressure ,therefore ,water flows out from the absorbing water source to pump outlet pipe through impeller .
Product Features
1). Adopting our factory OHV engine，Reliable function performance,easy to start
2). Pump is made of light strong aluminium alloy material
3). Cast iron scroll impeller
4).High-quality ceramic,silicon carbide mechanical seal
5).Low fuel consumption,Low-noise
Application
WP series pump is mainly used for farm irrigation ,garden irrigation and drainage , well water lift ,home living water pumping in rural areas where has no electricity power,it could also be used in urban and rural buildings,industrial and mining enterprises water supply and drainage.At the same time ,it can be used on the other engine to match sprayer,farmland thresher,etc
Working Conditions
WP series gasoline pump could normally work continuously in conditions as below ：
1). The Medium temperature should not exceed +40℃
2).The medium PH value should be in 5.5-8.5
3).The medium should be clean water withouth solid particles（The solid particle volume ratio in the medium should not exceed0.1% , particle size should not exceed0.2mm）
4).The pump Engine should use 90# gasoline
Model Explanation and Main Technical Datas
1).Model Explanation
WP80
WP----Gasoline Water Pump Name
80----Inlet and outlet Size（mm）
2).Main Technical datas
|
MODEL |
WP-50 |
WP-80 |
WP-100 |
|
Engine Type: |
Air-cooled 4-cycle Gasoline engine |
Air-cooled 4-cycle Gasoline engine |
Air-cooled 4-cycle Gasoline engine |
|
Engine Model: |
170F |
170F |
170F |
|
Discharging: |
163cc |
163cc |
163cc |
|
Output power: |
5.5HP |
6.5HP |
7.5HP |
|
Fuel Tank Capacity: |
3.6L |
3.6L |
3.6L |
|
Net Weight: |
22KG |
25KG |
30KG |
|
Suction/Discharge Port: |
2 inch (50mm) |
3 inch (80mm) |
4 inch (100mm) |
|
Lift: |
30m |
28m |
25m |
|
Suction |
8m |
8m |
8m |
|
Flow: |
35m3/h |
50m3/h |
75m3/h |
|
Package Size: |
530mm×390mm×430mm |
560mm×390mm×460mm |
635mm×495mm×570mm |
Our service:
Marketing Service
100% tested CE certified blowers.Special customized blowers(ATEX blower,belt-driven blower) for special industry.Like gas transportation,Medical industry…Professional advice for model selection and further market development.Pre-sales service:
•We are a sales team, with all technical support from engineer team.
•We value every inquiry sent to us, ensure quick competitive offer within 24 hours.
•We cooperate with customer to design and develop the new products. Provide all necessary document.After-sales service:
•We respect your feed back after receive the motors.
•We provide 1years warranty after receipt of motors..
•We promise all spare parts available in lifetime use.
•We loge your complain within 24 hours.
